I have an XW6200 Workstation with the LSI20320HP SCSI-PCI controller.
I want to enter the setup (BIOS) of the SCSI-controller, but unfortunately I found no way to get in it yet.
However in the manual of the LSI for HP (http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00212949/c00212949.pdf)
it says press Ctrl-C during the booting of the XW6200, but there is no such a message while booting - anyway I tried it an pressed many times the Ctrl-C key-combination without any reaction.
While the pc is booting, there is a message "press F8" which shows a menu for the SCSI-ID changing but no configuration program for the controller.
What do I wrong? How can I enter the BIOS of the LSI20320HP SCSI-Controller?
Thanks in advance
Greeting
Thomas
Note: If you are the author of this question and wish to assign points to any of the answers, please login first.For more information on assigning points ,click
here
It was so as I guessed. The firmware and BIOS of the installed LSI20320 Controller was burned and customized by HP. Now I reflashed first the firmware with the firmeware from HP-Download-Center and then flashed the BIOS with the LSI-Utilities from the LSI-Website.
Printable version
